Toughened safety glass in Greater London

What should toughened safety glass cost in Greater London?

Guide prices for toughened safety glass in Greater London are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit
Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Holes, notches and polished edges for frameless fittings
Made to measure for each opening

Covering Greater London

We can arrange surveys and fitting anywhere in Greater London, including Central London and Islington. Dates depend on installer availability. Choose your town below for local details.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Good candidates for toughened safety glass:

Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices
Glazed doors and side panels
Frameless office partitions and doors

Towns in Greater London

Before the glass is ordered

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Greater London
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Greater London: questions

Which towns in Greater London do you cover?

We can arrange work anywhere in Greater London, including Central London, Islington, Bexley, Barking and Archway, and in other towns across the area.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Other glazing in Greater London

Tell us about the glazing and we will come back with a guide price.