Toughened safety glass in Ilford

Toughened safety glass in Ilford: what will it cost?

Typical prices for toughened safety glass in Ilford are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit
Clear, tinted, obscure, low-iron and sandblasted finishes
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Made to measure for each opening

Fitting in Ilford and nearby

Surveys in Ilford (IG1) are booked around installer availability. We also cover nearby Barking (2 miles), Becontree (2 miles) and Leytonstone (3 miles).

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical settings for toughened safety glass:

Shower screens and splashbacks
Glazed doors and side panels
Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup

Getting the right glass for your building

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Ilford
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Ilford: questions

Can you survey in Ilford and nearby towns?

Yes. Surveys in Ilford, Barking and Becontree are booked around installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Ilford

Tell us about the glazing and we will come back with a guide price.