Toughened safety glass in Catford

What should toughened safety glass cost in Catford?

Our guide range for toughened safety glass in Catford is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit
Made to measure for each opening
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Catford and nearby

We can arrange toughened safety glass anywhere in Catford, and in nearby Blackheath, Greenwich and Beckenham. Tell us your postcode and we will offer dates.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Good candidates for toughened safety glass:

Frameless office partitions and doors
Shower screens and splashbacks
Glazed doors and side panels
Panes below 800 mm in homes and offices

Before the glass is ordered

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Glazing rules in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Guide price online or by phone
Survey in Catford
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Catford: questions

Which areas near Catford do you cover?

We can arrange work in Catford and in nearby Blackheath (2 miles), Greenwich (2 miles) and Beckenham (3 miles). Dates depend on installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Catford

Tell us about the glazing and we will come back with a guide price.