Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · W3 · Greater London

Toughened safety glass in Acton

Toughened safety glass for homes and businesses in Acton, specified after a free survey and fitted by glaziers working under our contract with you.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Acton

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much does toughened safety glass cost in Acton?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Acton, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

  • Four to five times the strength of annealed glass
  • Made to BS EN 12150 and marked for identification
  • Single panes or the outer pane of a sealed unit
  • Heat-soaked option for large and overhead panes
  • Breaks into small blunt fragments
  • Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Acton and nearby

We arrange surveys and fitting in Acton and across the W3 postcode district, as well as in nearby Chiswick (1 mile) and Shepherds Bush (2 miles). Dates depend on installer availability.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical places for toughened safety glass:

  • Balustrades in a laminated toughened makeup
  • Panes below 800 mm in homes and offices
  • Glazed doors and side panels
  • Shower screens and splashbacks

Things to decide before you order

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Acton address
  3. Fixed price in writing
  4. Glass made, then fitted

Toughened safety glass in Acton: questions

Do you cover Chiswick as well as Acton?

Yes. As well as Acton, we can arrange surveys in nearby Chiswick, Shepherds Bush and Willesden. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Acton

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Acton

Free survey for new installations in Acton and the W3 area. Fixed price in writing before anything is ordered.

CallGet a price