Toughened safety glass in Mitcham

How much does toughened safety glass cost in Mitcham?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Mitcham, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Four to five times the strength of annealed glass
Clear, tinted, obscure, low-iron and sandblasted finishes
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Breaks into small blunt fragments
Made to measure for each opening

Fitting in Mitcham and nearby

We arrange surveys and fitting in Mitcham and across the CR4 postcode district, as well as in nearby Morden (1 mile) and Wimbledon (2 miles). Dates depend on installer availability.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical places for toughened safety glass:

Glazed doors and side panels
Panes below 800 mm in homes and offices
Frameless office partitions and doors
Balustrades in a laminated toughened makeup

Things to decide before you order

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Send sizes or use the quote tool
Free survey at your Mitcham address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Mitcham: questions

Do you cover Morden as well as Mitcham?

Yes. As well as Mitcham, we can arrange surveys in nearby Morden, Wimbledon and Streatham. Dates depend on installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Mitcham

Ready for a price? Use the form or call 0800 088 6248.