Toughened safety glass in Bexley: what will it cost?
Typical prices for toughened safety glass in Bexley are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
Specification at a glance
- Heat-soaked option for large and overhead panes
- Four to five times the strength of annealed glass
- Clear, tinted, obscure, low-iron and sandblasted finishes
- Made to measure for each opening
- Holes, notches and polished edges for frameless fittings
- Single panes or the outer pane of a sealed unit
Fitting in Bexley and nearby
Whether you are in central Bexley or at the edge of the DA5 district, we can arrange a survey. Nearby Welling and Dartford are covered too.
Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.
Typical settings for toughened safety glass:
- Frameless office partitions and doors
- Glazed doors and side panels
- Panes below 800 mm in homes and offices
- Balustrades in a laminated toughened makeup
Getting the right glass for your building
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
Heat soaking
Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.
What the rules say in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Tell us about the glazing
- Survey, measuring and frame check
- Written quote naming the glass
- Fitting and handover
Toughened safety glass in Bexley: questions
Do you cover Welling as well as Bexley?
Yes. As well as Bexley, we can arrange surveys in nearby Welling, Dartford and Swanley. Dates depend on installer availability.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Why did my toughened glass break on its own?
Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.
Toughened safety glass in nearby towns
Other glazing in Bexley
- Broken glass replacement
- Security glass for doors
- Security window film
- Patio and bifold door security glass
- Misted unit replacement with laminated glass
- Security secondary glazing
Get a guide price now and book your free survey in Bexley.