Toughened safety glass in Enfield

How much should I budget for toughened safety glass in Enfield?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Enfield, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Four to five times the strength of annealed glass
Made to BS EN 12150 and marked for identification
Holes, notches and polished edges for frameless fittings
Single panes or the outer pane of a sealed unit
Heat-soaked option for large and overhead panes
Breaks into small blunt fragments

Fitting in Enfield and nearby

We arrange surveys and fitting in Enfield and across the EN1 postcode district, as well as in nearby Edmonton (2 miles) and Tottenham (3 miles). Dates depend on installer availability.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Common uses:

Glazed doors and side panels
Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices
Shower screens and splashbacks

What to think about first

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Consents and safety: England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Enfield address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Enfield: questions

Do you cover Edmonton as well as Enfield?

Yes. As well as Enfield, we can arrange surveys in nearby Edmonton, Tottenham and Wood Green. Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Enfield

Ready for a price? Use the form or call 0800 088 6248.