Toughened safety glass in Putney

Toughened safety glass in Putney: what will it cost?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Putney, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Options for toughened safety glass in Putney

Made to measure for each opening
Heat-soaked option for large and overhead panes
Four to five times the strength of annealed glass
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Putney and nearby

Putney is about 5 miles from Central London, the main centre for Greater London. We can survey and fit across the SW15 district and in nearby places such as Barnes and Fulham.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical settings for toughened safety glass:

Panes below 800 mm in homes and offices
Shower screens and splashbacks
Frameless office partitions and doors
Balustrades in a laminated toughened makeup

Getting the right glass for your building

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

What the rules say in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Putney: questions

Which areas near Putney do you cover?

We can arrange work in Putney and in nearby Barnes (2 miles), Fulham (2 miles) and Wimbledon (3 miles). Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Putney

Start with a guide price online, then we survey and fix the price in writing.