Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · RM10 · Greater London

Toughened safety glass in Dagenham

Toughened safety glass for homes, flats, shops and offices in Dagenham, with the glass makeup confirmed in writing before it is ordered.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Dagenham

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Toughened safety glass in Dagenham: what will it cost?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Dagenham, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

  • Holes, notches and polished edges for frameless fittings
  • Breaks into small blunt fragments
  • Single panes or the outer pane of a sealed unit
  • Four to five times the strength of annealed glass
  • Made to BS EN 12150 and marked for identification
  • Heat-soaked option for large and overhead panes

Fitting in Dagenham and nearby

Whether you are in central Dagenham or at the edge of the RM10 district, we can arrange a survey. Nearby Becontree and Romford are covered too.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

Typical settings for toughened safety glass:

  • Panes below 800 mm in homes and offices
  • Frameless office partitions and doors
  • Shower screens and splashbacks
  • Glazed doors and side panels

Getting the right glass for your building

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

What the rules say in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Postcode and a few photos
  2. On-site survey
  3. Fixed written price and lead time
  4. Fit, check and explain

Toughened safety glass in Dagenham: questions

Do you cover Becontree as well as Dagenham?

Yes. As well as Dagenham, we can arrange surveys in nearby Becontree, Romford and Hornchurch. Dates depend on installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Dagenham

Start with a guide price online, then we survey and fix the price in writing.

Get a guide price for Dagenham

Free survey for new installations in Dagenham and the RM10 area. Fixed price in writing before anything is ordered.

CallGet a price