Toughened safety glass in Hornchurch

What is the price of toughened safety glass in Hornchurch?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Hornchurch. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Made to BS EN 12150 and marked for identification
Breaks into small blunt fragments
Single panes or the outer pane of a sealed unit
Holes, notches and polished edges for frameless fittings
Four to five times the strength of annealed glass
Made to measure for each opening

Fitting in Hornchurch and nearby

We can arrange toughened safety glass anywhere in Hornchurch, and in nearby Romford, Dagenham and Becontree. Tell us your postcode and we will offer dates.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

This glazing suits:

Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Glazed doors and side panels
Shower screens and splashbacks

Questions we will ask at the survey

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Hornchurch address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Hornchurch: questions

Which areas near Hornchurch do you cover?

We can arrange work in Hornchurch and in nearby Romford (2 miles), Dagenham (2 miles) and Becontree (4 miles). Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Hornchurch

Ready for a price? Use the form or call 0800 088 6248.