Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · CR0 · Greater London

Toughened safety glass in Croydon

Toughened safety glass in Croydon and the CR0 area, measured on site and priced in writing before any glass is ordered.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Croydon

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What is the price of toughened safety glass in Croydon?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Croydon. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

  • Single panes or the outer pane of a sealed unit
  • Made to BS EN 12150 and marked for identification
  • Clear, tinted, obscure, low-iron and sandblasted finishes
  • Made to measure for each opening
  • Four to five times the strength of annealed glass
  • Heat-soaked option for large and overhead panes

Fitting in Croydon and nearby

From the CR0 district we also cover South Croydon (1 mile) and Wallington (3 miles). Survey dates depend on installer availability.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

This glazing suits:

  • Shower screens and splashbacks
  • Balustrades in a laminated toughened makeup
  • Panes below 800 mm in homes and offices
  • Frameless office partitions and doors

Questions we will ask at the survey

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Toughened safety glass in Croydon: questions

Can you survey in Croydon and nearby towns?

Yes. Surveys in Croydon, South Croydon and Wallington are booked around installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Croydon

Get a guide price now and book your free survey in Croydon.

Get a guide price for Croydon

Free survey for new installations in Croydon and the CR0 area. Fixed price in writing before anything is ordered.

CallGet a price