How much does toughened safety glass cost in Brighton?
Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Brighton, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
What you can specify
- Clear, tinted, obscure, low-iron and sandblasted finishes
- Heat-soaked option for large and overhead panes
- Made to BS EN 12150 and marked for identification
- Breaks into small blunt fragments
- Holes, notches and polished edges for frameless fittings
- Made to measure for each opening
Fitting in Brighton and nearby
We arrange surveys and fitting across Brighton and the BN2 postcode district, and in nearby Hove (1 mile), Portslade (3 miles) and Burgess Hill.
East Sussex mixes the Regency bow-fronted terraces and busy shopping lanes of Brighton and Hove with Victorian seafronts in Eastbourne and Hastings and historic Lewes and Rye.
Typical places for toughened safety glass:
- Frameless office partitions and doors
- Balustrades in a laminated toughened makeup
- Glazed doors and side panels
- Panes below 800 mm in homes and offices
Things to decide before you order
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
Measure once, carefully
Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.
Rules that apply in England
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Guide price online or by phone
- Survey in Brighton
- Accept the fixed quote
- Fitted by glaziers working under our contract
Toughened safety glass in Brighton: questions
Do you cover Hove as well as Brighton?
Yes. As well as Brighton, we can arrange surveys in nearby Hove, Portslade and Burgess Hill. Dates depend on installer availability.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
Is toughened glass a security glass?
No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Toughened safety glass in nearby towns
Other glazing in Brighton
- Misted unit replacement with laminated glass
- Security secondary glazing
- Kiosk and booth security glazing
- Shopfront security glass
- Security glazed doors and screens
- Commercial reglazing
Tell us about the glazing and we will come back with a guide price.