Toughened safety glass in Burgess Hill

Toughened safety glass in Burgess Hill: what will it cost?

Our guide range for toughened safety glass in Burgess Hill is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Heat-soaked option for large and overhead panes
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings
Clear, tinted, obscure, low-iron and sandblasted finishes
Four to five times the strength of annealed glass

Fitting in Burgess Hill and nearby

From the RH15 district we also cover Haywards Heath (3 miles) and Portslade (9 miles). Survey dates depend on installer availability.

West Sussex includes Chichester's Georgian city centre, the seaside towns of Worthing and Bognor Regis, Crawley's new-town centre and business parks, and Horsham's market-town streets.

Typical settings for toughened safety glass:

Glazed doors and side panels
Frameless office partitions and doors
Balustrades in a laminated toughened makeup
Shower screens and splashbacks

Getting the right glass for your building

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Burgess Hill: questions

Can you survey in Burgess Hill and nearby towns?

Yes. Surveys in Burgess Hill, Haywards Heath and Portslade are booked around installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Burgess Hill

Start with a guide price online, then we survey and fix the price in writing.