Toughened safety glass in East Sussex

How much does toughened safety glass cost in East Sussex?

Our guide range for toughened safety glass in East Sussex is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Holes, notches and polished edges for frameless fittings
Heat-soaked option for large and overhead panes
Made to measure for each opening
Breaks into small blunt fragments
Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit

Covering East Sussex

We can arrange surveys and fitting anywhere in East Sussex, including Brighton and Eastbourne. Dates depend on installer availability. Choose your town below for local details.

East Sussex mixes the Regency bow-fronted terraces and busy shopping lanes of Brighton and Hove with Victorian seafronts in Eastbourne and Hastings and historic Lewes and Rye.

Typical places for toughened safety glass:

Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Glazed doors and side panels
Panes below 800 mm in homes and offices

Towns in East Sussex

Things to decide before you order

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in East Sussex: questions

Which towns in East Sussex do you cover?

We can arrange work anywhere in East Sussex, including Brighton, Eastbourne, Hastings, Hove and Bexhill-on-Sea, and in other towns across the area.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Other glazing in East Sussex

Start with a guide price online, then we survey and fix the price in writing.

Free quote in East Sussex