Toughened safety glass in Worthing

What should toughened safety glass cost in Worthing?

Typical prices for toughened safety glass in Worthing are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

Clear, tinted, obscure, low-iron and sandblasted finishes
Single panes or the outer pane of a sealed unit
Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Breaks into small blunt fragments

Fitting in Worthing and nearby

Whether you are in central Worthing or at the edge of the BN11 district, we can arrange a survey. Nearby Portslade and Littlehampton are covered too.

West Sussex includes Chichester's Georgian city centre, the seaside towns of Worthing and Bognor Regis, Crawley's new-town centre and business parks, and Horsham's market-town streets.

Good candidates for toughened safety glass:

Panes below 800 mm in homes and offices
Glazed doors and side panels
Shower screens and splashbacks
Frameless office partitions and doors

Before the glass is ordered

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Worthing: questions

Do you cover Portslade as well as Worthing?

Yes. As well as Worthing, we can arrange surveys in nearby Portslade, Littlehampton and Hove. Dates depend on installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Toughened safety glass in nearby towns

Other glazing in Worthing

Start with a guide price online, then we survey and fix the price in writing.