Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · LA14 · Cumbria

Blast-resistant glazing in Barrow-in-Furness

Need blast-resistant glazing in Barrow-in-Furness? Send sizes or photos for a guide price, then we survey and confirm a fixed price.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Barrow-in-Furness

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

Blast-resistant glazing in Barrow-in-Furness: what will it cost?

Typical prices for blast-resistant glazing in Barrow-in-Furness are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Choices you can make

  • Sealed units with a laminated inner pane
  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention
  • Work planned from the threat assessment and engineer's design
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Manufacturer's test evidence supplied with your quote

Fitting in Barrow-in-Furness and nearby

We can arrange blast-resistant glazing anywhere in Barrow-in-Furness, and in nearby Morecambe, Fleetwood and Lancaster. Tell us your postcode and we will offer dates.

Cumbria's stone-built towns such as Kendal, Keswick and Penrith, Carlisle's Victorian centre and coastal Whitehaven and Barrow-in-Furness all take wet, windy Atlantic weather.

Typical settings for blast-resistant glazing:

  • Transport hubs, venues and stadium frontages
  • Government, council and civic buildings
  • Embassies, courts and police premises
  • Laboratories and industrial sites with process risks

Getting the right glass for your building

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

What the rules say in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Guide price online or by phone
  2. Survey in Barrow-in-Furness
  3. Accept the fixed quote
  4. Fitted by glaziers working under our contract

Blast-resistant glazing in Barrow-in-Furness: questions

Which areas near Barrow-in-Furness do you cover?

We can arrange work in Barrow-in-Furness and in nearby Morecambe (15 miles), Fleetwood (16 miles) and Lancaster (18 miles). Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Barrow-in-Furness

Tell us about the glazing and we will come back with a guide price.

Get a guide price for Barrow-in-Furness

Free survey for new installations in Barrow-in-Furness and the LA14 area. Fixed price in writing before anything is ordered.

CallGet a price