Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · FY1 · Lancashire

Blast-resistant glazing in Blackpool

Start with a guide price for blast-resistant glazing in Blackpool, then book a free survey for a fixed written quote.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Blackpool

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should blast-resistant glazing cost in Blackpool?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Blackpool, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What you can specify

  • Anti-shatter film with edge-retention systems for existing windows
  • Deep-bite frames and structural silicone or mechanical retention
  • Blast-resistant net curtains as a fragment-catching layer
  • Work planned from the threat assessment and engineer's design
  • Sealed units with a laminated inner pane
  • Manufacturer's test evidence supplied with your quote

Fitting in Blackpool and nearby

We arrange surveys and fitting in Blackpool and across the FY1 postcode district, as well as in nearby Thornton-Cleveleys (4 miles) and Lytham St Annes (6 miles). Dates depend on installer availability.

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Good candidates for blast-resistant glazing:

  • Transport hubs, venues and stadium frontages
  • Offices in city centres and near potential targets
  • Government, council and civic buildings
  • Embassies, courts and police premises

Before the glass is ordered

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Glazing rules in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Blackpool address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Blackpool: questions

Do you cover Thornton-Cleveleys as well as Blackpool?

Yes. As well as Blackpool, we can arrange surveys in nearby Thornton-Cleveleys, Lytham St Annes and Fleetwood. Dates depend on installer availability.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Blast-resistant glazing in nearby towns

Other glazing in Blackpool

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Blackpool

Free survey for new installations in Blackpool and the FY1 area. Fixed price in writing before anything is ordered.

CallGet a price