Blast-resistant glazing in Morecambe

What is the price of blast-resistant glazing in Morecambe?

As a guide, allow £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Morecambe, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Deep-bite frames and structural silicone or mechanical retention
Anti-shatter film with edge-retention systems for existing windows
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Manufacturer's test evidence supplied with your quote
Sealed units with a laminated inner pane
Laminated glass with thick or stiff interlayers

Fitting in Morecambe and nearby

Surveys in Morecambe (LA4) are booked around installer availability. We also cover nearby Lancaster (3 miles), Fleetwood (12 miles) and Thornton-Cleveleys (15 miles).

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

This glazing suits:

Laboratories and industrial sites with process risks
Government, council and civic buildings
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets

Questions we will ask at the survey

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Building regulations and safety in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Send sizes or use the quote tool
Free survey at your Morecambe address
Fixed price in writing
Glass made, then fitted

Blast-resistant glazing in Morecambe: questions

Can you survey in Morecambe and nearby towns?

Yes. Surveys in Morecambe, Lancaster and Fleetwood are booked around installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Blast-resistant glazing in nearby towns

Other glazing in Morecambe

Ready for a price? Use the form or call 0800 088 6248.