Blast-resistant glazing in Fleetwood

What should blast-resistant glazing cost in Fleetwood?

Typical prices for blast-resistant glazing in Fleetwood are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Blast-resistant net curtains as a fragment-catching layer
Anti-shatter film with edge-retention systems for existing windows
Deep-bite frames and structural silicone or mechanical retention
Laminated glass with thick or stiff interlayers
Sealed units with a laminated inner pane
Manufacturer's test evidence supplied with your quote

Fitting in Fleetwood and nearby

Surveys in Fleetwood (FY7) are booked around installer availability. We also cover nearby Thornton-Cleveleys (4 miles), Blackpool (8 miles) and Morecambe (12 miles).

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Good candidates for blast-resistant glazing:

Government, council and civic buildings
Transport hubs, venues and stadium frontages
Embassies, courts and police premises
Offices in city centres and near potential targets

Before the glass is ordered

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in Fleetwood
Accept the fixed quote
Fitted by glaziers working under our contract

Blast-resistant glazing in Fleetwood: questions

Can you survey in Fleetwood and nearby towns?

Yes. Surveys in Fleetwood, Thornton-Cleveleys and Blackpool are booked around installer availability.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Blast-resistant glazing in nearby towns

Other glazing in Fleetwood

Tell us about the glazing and we will come back with a guide price.