Blast-resistant glazing in Lancaster

What should blast-resistant glazing cost in Lancaster?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Lancaster, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

Manufacturer's test evidence supplied with your quote
Deep-bite frames and structural silicone or mechanical retention
Anti-shatter film with edge-retention systems for existing windows
Laminated glass with thick or stiff interlayers
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Sealed units with a laminated inner pane

Fitting in Lancaster and nearby

Whether you are in central Lancaster or at the edge of the LA1 district, we can arrange a survey. Nearby Morecambe and Fleetwood are covered too.

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Good candidates for blast-resistant glazing:

Transport hubs, venues and stadium frontages
Embassies, courts and police premises
Offices in city centres and near potential targets
Government, council and civic buildings

Before the glass is ordered

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Blast-resistant glazing in Lancaster: questions

Do you cover Morecambe as well as Lancaster?

Yes. As well as Lancaster, we can arrange surveys in nearby Morecambe, Fleetwood and Thornton-Cleveleys. Dates depend on installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Lancaster

Get a guide price now and book your free survey in Lancaster.