Toughened safety glass in Horsham

How much should I budget for toughened safety glass in Horsham?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Horsham, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Four to five times the strength of annealed glass
Breaks into small blunt fragments
Made to measure for each opening
Heat-soaked option for large and overhead panes
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification

Fitting in Horsham and nearby

From the RH12 district we also cover Crawley (7 miles) and Horley (11 miles). Survey dates depend on installer availability.

West Sussex includes Chichester's Georgian city centre, the seaside towns of Worthing and Bognor Regis, Crawley's new-town centre and business parks, and Horsham's market-town streets.

Common uses:

Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Glazed doors and side panels

What to think about first

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Horsham: questions

Can you survey in Horsham and nearby towns?

Yes. Surveys in Horsham, Crawley and Horley are booked around installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Horsham

Start with a guide price online, then we survey and fix the price in writing.