Toughened safety glass in Crawley

What is the price of toughened safety glass in Crawley?

Guide prices for toughened safety glass in Crawley are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Options for toughened safety glass in Crawley

Breaks into small blunt fragments
Four to five times the strength of annealed glass
Made to BS EN 12150 and marked for identification
Made to measure for each opening
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Crawley and nearby

We can arrange toughened safety glass across Crawley, the main centre for West Sussex, and in nearby towns including Horley, Horsham and East Grinstead.

West Sussex includes Chichester's Georgian city centre, the seaside towns of Worthing and Bognor Regis, Crawley's new-town centre and business parks, and Horsham's market-town streets.

This glazing suits:

Shower screens and splashbacks
Frameless office partitions and doors
Balustrades in a laminated toughened makeup
Glazed doors and side panels

Questions we will ask at the survey

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in Crawley: questions

Which areas near Crawley do you cover?

We can arrange work in Crawley and in nearby Horley (4 miles), Horsham (7 miles) and East Grinstead (8 miles). Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Crawley

Get a guide price now and book your free survey in Crawley.