Toughened safety glass in Hailsham

How much does toughened safety glass cost in Hailsham?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Hailsham. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Made to BS EN 12150 and marked for identification
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings
Heat-soaked option for large and overhead panes
Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit

Fitting in Hailsham and nearby

Surveys in Hailsham (BN27) are booked around installer availability. We also cover nearby Eastbourne (7 miles), Seaford (9 miles) and Bexhill-on-Sea (9 miles).

East Sussex mixes the Regency bow-fronted terraces and busy shopping lanes of Brighton and Hove with Victorian seafronts in Eastbourne and Hastings and historic Lewes and Rye.

Typical places for toughened safety glass:

Panes below 800 mm in homes and offices
Frameless office partitions and doors
Glazed doors and side panels
Balustrades in a laminated toughened makeup

Things to decide before you order

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Rules that apply in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes or use the quote tool
Free survey at your Hailsham address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Hailsham: questions

Can you survey in Hailsham and nearby towns?

Yes. Surveys in Hailsham, Eastbourne and Seaford are booked around installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Hailsham

Ready for a price? Use the form or call 0800 088 6248.