Toughened safety glass in Portishead

How much does toughened safety glass cost in Portishead?

Typical prices for toughened safety glass in Portishead are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Single panes or the outer pane of a sealed unit
Made to BS EN 12150 and marked for identification
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes
Four to five times the strength of annealed glass
Made to measure for each opening

Fitting in Portishead and nearby

We can arrange toughened safety glass anywhere in Portishead, and in nearby Nailsea, Clevedon and Bristol. Tell us your postcode and we will offer dates.

Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.

Typical places for toughened safety glass:

Frameless office partitions and doors
Panes below 800 mm in homes and offices
Shower screens and splashbacks
Glazed doors and side panels

Things to decide before you order

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Rules that apply in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Guide price online or by phone
Survey in Portishead
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Portishead: questions

Which areas near Portishead do you cover?

We can arrange work in Portishead and in nearby Nailsea (3 miles), Clevedon (5 miles) and Bristol (8 miles). Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Portishead

Tell us about the glazing and we will come back with a guide price.