How much does toughened safety glass cost in Bristol?
Typical prices for toughened safety glass in Bristol are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
Glass and fitting options
- Clear, tinted, obscure, low-iron and sandblasted finishes
- Heat-soaked option for large and overhead panes
- Four to five times the strength of annealed glass
- Breaks into small blunt fragments
- Holes, notches and polished edges for frameless fittings
- Made to BS EN 12150 and marked for identification
Covering Bristol
We can arrange surveys and fitting anywhere in Bristol, including Clifton and Bedminster. Dates depend on installer availability.
Bristol's glazing ranges from Georgian sash windows in Clifton and Kingsdown to Victorian bay fronts in Bedminster and modern glazed offices around Temple Quarter and the harbourside.
Typical places for toughened safety glass:
- Balustrades in a laminated toughened makeup
- Panes below 800 mm in homes and offices
- Shower screens and splashbacks
- Frameless office partitions and doors
Things to decide before you order
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
Measure once, carefully
Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.
Rules that apply in England
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
How it works
- Postcode and a few photos
- On-site survey
- Fixed written price and lead time
- Fit, check and explain
Toughened safety glass in Bristol: questions
Which parts in Bristol do you cover?
We can arrange work anywhere in Bristol, including Clifton, Bedminster, Easton, Fishponds and Southville.
Why did my toughened glass break on its own?
Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
Other glazing in Bristol
- Anti-ram-raid glazing
- Misted unit replacement with laminated glass
- Commercial reglazing
- Security secondary glazing
- Bullet-resistant glass
- Laminated roof and conservatory glass
Start with a guide price online, then we survey and fix the price in writing.