Toughened safety glass in Somerset

How much should I budget for toughened safety glass in Somerset?

Our guide range for toughened safety glass in Somerset is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Holes, notches and polished edges for frameless fittings
Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification

Covering Somerset

We can arrange surveys and fitting anywhere in Somerset, including Bath and Weston-super-Mare. Dates depend on installer availability. Choose your town below for local details.

Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.

Common uses:

Glazed doors and side panels
Shower screens and splashbacks
Balustrades in a laminated toughened makeup
Panes below 800 mm in homes and offices

Towns in Somerset

What to think about first

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Consents and safety: England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Send sizes or use the quote tool
Free survey at your Somerset address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Somerset: questions

Which towns in Somerset do you cover?

We can arrange work anywhere in Somerset, including Bath, Weston-super-Mare, Taunton, Yeovil and Bridgwater, and in other towns across the area.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Other glazing in Somerset

Ready for a price? Use the form or call 0800 088 6248.

Free quote in Somerset