Toughened safety glass in Clevedon

How much does toughened safety glass cost in Clevedon?

Typical prices for toughened safety glass in Clevedon are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Breaks into small blunt fragments
Made to measure for each opening
Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to BS EN 12150 and marked for identification

Fitting in Clevedon and nearby

We can arrange toughened safety glass anywhere in Clevedon, and in nearby Nailsea, Portishead and Weston-super-Mare. Tell us your postcode and we will offer dates.

Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.

Typical places for toughened safety glass:

Frameless office partitions and doors
Shower screens and splashbacks
Glazed doors and side panels
Panes below 800 mm in homes and offices

Things to decide before you order

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Rules that apply in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Guide price online or by phone
Survey in Clevedon
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Clevedon: questions

Which areas near Clevedon do you cover?

We can arrange work in Clevedon and in nearby Nailsea (4 miles), Portishead (5 miles) and Weston-super-Mare (8 miles). Dates depend on installer availability.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Clevedon

Tell us about the glazing and we will come back with a guide price.