How much does toughened safety glass cost in Bath?
Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Bath, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
Specification at a glance
- Single panes or the outer pane of a sealed unit
- Clear, tinted, obscure, low-iron and sandblasted finishes
- Holes, notches and polished edges for frameless fittings
- Four to five times the strength of annealed glass
- Breaks into small blunt fragments
- Made to measure for each opening
Fitting in Bath and nearby
Whether you are in central Bath or at the edge of the BA1 district, we can arrange a survey. Nearby Trowbridge and Melksham are covered too.
Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.
Typical places for toughened safety glass:
- Balustrades in a laminated toughened makeup
- Panes below 800 mm in homes and offices
- Frameless office partitions and doors
- Shower screens and splashbacks
Things to decide before you order
Measure once, carefully
Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
Rules that apply in England
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
Glazing in workplaces
Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.
How it works
- Tell us about the glazing
- Survey, measuring and frame check
- Written quote naming the glass
- Fitting and handover
Toughened safety glass in Bath: questions
Do you cover Trowbridge as well as Bath?
Yes. As well as Bath, we can arrange surveys in nearby Trowbridge, Melksham and Mangotsfield. Dates depend on installer availability.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
Where must safety glass be used?
In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.
Why did my toughened glass break on its own?
Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.
Toughened safety glass in nearby towns
Other glazing in Bath
- Security double-glazed units
- Glazing bead security upgrades
- Bullet-resistant glass
- Blast-resistant glazing
- Shopfront security glass
- Laminated security glass
Get a guide price now and book your free survey in Bath.