Security double-glazed units in Bath

Security double-glazed units in Bath: what will it cost?

Budget £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Bath, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Specification at a glance

Laminated inner pane, outer pane or both
Low-E coating and argon fill for insulation
Obscure and decorative glass for bathrooms and doors
Toughened outer pane where safety glass is required
Made to measure for each sash, light and door panel
Security glazing tape or clips where beads are external

Fitting in Bath and nearby

Whether you are in central Bath or at the edge of the BA1 district, we can arrange a survey. Nearby Trowbridge and Melksham are covered too.

Somerset's glazing runs from the Georgian sashes of Bath, a World Heritage city, to the town-centre shops of Taunton and Yeovil and the seafront at Weston-super-Mare.

Typical settings for security double-glazed units:

Glazed back and side doors
Replacing misted or damaged units
Patio doors and bifolds
Windows in flats on walkways and balconies

Getting the right glass for your building

Energy performance

Choosing low-E glass, argon and warm-edge spacers keeps the window as efficient as possible, often better than the unit being replaced.

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

What the rules say in England

England

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Security double-glazed units in Bath: questions

Do you cover Trowbridge as well as Bath?

Yes. As well as Bath, we can arrange surveys in nearby Trowbridge, Melksham and Mangotsfield. Dates depend on installer availability.

Which pane should be laminated?

Usually the inner pane, so smashing the outer pane does not create an opening. On doors and low panes the outer pane is normally toughened to meet safety rules.

Can I just replace the glass and keep my frames?

Yes, if the frames are sound. We measure each unit, make security units to the same size and fit them into your existing frames.

How long do new units take?

Units are made to order after the survey. Lead times vary with glass type and size, and we confirm them when we quote.

Security double-glazed units in nearby towns

Other glazing in Bath

Start with a guide price online, then we survey and fix the price in writing.