Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · England

Toughened safety glass in Cambridgeshire

Toughened safety glass across Cambridgeshire, from Peterborough and Cambridge to smaller towns, specified after a free survey.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Cambridgeshire

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should toughened safety glass cost in Cambridgeshire?

Typical prices for toughened safety glass in Cambridgeshire are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

  • Clear, tinted, obscure, low-iron and sandblasted finishes
  • Heat-soaked option for large and overhead panes
  • Holes, notches and polished edges for frameless fittings
  • Made to measure for each opening
  • Single panes or the outer pane of a sealed unit
  • Breaks into small blunt fragments

Covering Cambridgeshire

We can arrange surveys and fitting anywhere in Cambridgeshire, including Peterborough and Cambridge. Dates depend on installer availability. Choose your town below for local details.

Cambridgeshire has listed college streets and shopfronts in Cambridge and Ely, Peterborough's Victorian terraces and modern retail, and science-park offices with large glazed facades.

Good candidates for toughened safety glass:

  • Frameless office partitions and doors
  • Glazed doors and side panels
  • Panes below 800 mm in homes and offices
  • Shower screens and splashbacks

Towns in Cambridgeshire

Before the glass is ordered

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Glazing rules in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Cambridgeshire address
  3. Fixed price in writing
  4. Glass made, then fitted

Toughened safety glass in Cambridgeshire: questions

Which towns in Cambridgeshire do you cover?

We can arrange work anywhere in Cambridgeshire, including Peterborough, Cambridge, Wisbech, St Neots and Huntingdon, and in other towns across the area.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Other glazing in Cambridgeshire

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Cambridgeshire

Free survey for new installations across Cambridgeshire. Fixed price in writing before anything is ordered.

CallGet a price