Toughened safety glass in Cambridge

How much does toughened safety glass cost in Cambridge?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Cambridge. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

Clear, tinted, obscure, low-iron and sandblasted finishes
Made to BS EN 12150 and marked for identification
Heat-soaked option for large and overhead panes
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Single panes or the outer pane of a sealed unit

Fitting in Cambridge and nearby

Whether you are in central Cambridge or at the edge of the CB1 district, we can arrange a survey. Nearby Newmarket and Huntingdon are covered too.

Cambridgeshire has listed college streets and shopfronts in Cambridge and Ely, Peterborough's Victorian terraces and modern retail, and science-park offices with large glazed facades.

Typical places for toughened safety glass:

Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup
Glazed doors and side panels
Shower screens and splashbacks

Things to decide before you order

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Toughened safety glass in Cambridge: questions

Do you cover Newmarket as well as Cambridge?

Yes. As well as Cambridge, we can arrange surveys in nearby Newmarket, Huntingdon and Haverhill. Dates depend on installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Cambridge

Start with a guide price online, then we survey and fix the price in writing.