Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · PR8 · Merseyside

Blast-resistant glazing in Southport

Blast-resistant glazing supplied and fitted in Southport, Merseyside: glass chosen for the risk, made to size and fitted by glaziers working under our contract with you.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Southport

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

How much should I budget for blast-resistant glazing in Southport?

Budget £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Southport, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

  • Deep-bite frames and structural silicone or mechanical retention
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Sealed units with a laminated inner pane
  • Work planned from the threat assessment and engineer's design
  • Blast-resistant net curtains as a fragment-catching layer
  • Manufacturer's test evidence supplied with your quote

Fitting in Southport and nearby

Whether you are in central Southport or at the edge of the PR8 district, we can arrange a survey. Nearby Formby and Lytham St Annes are covered too.

Merseyside has Liverpool's listed commercial centre and waterfront offices, Victorian terraces across the city and the Wirral, and suburban high streets in Southport and St Helens.

Common uses:

  • Embassies, courts and police premises
  • Transport hubs, venues and stadium frontages
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets

What to think about first

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Consents and safety: England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Postcode and a few photos
  2. On-site survey
  3. Fixed written price and lead time
  4. Fit, check and explain

Blast-resistant glazing in Southport: questions

Do you cover Formby as well as Southport?

Yes. As well as Southport, we can arrange surveys in nearby Formby, Lytham St Annes and Ormskirk. Dates depend on installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Blast-resistant glazing in nearby towns

Other glazing in Southport

Start with a guide price online, then we survey and fix the price in writing.

Get a guide price for Southport

Free survey for new installations in Southport and the PR8 area. Fixed price in writing before anything is ordered.

CallGet a price