What is the price of toughened safety glass in Newcastle upon Tyne?
Our guide range for toughened safety glass in Newcastle upon Tyne is £114 to £414 including VAT (£95 to £345 plus VAT) per pane, including fitting. The survey is free for new installations and your fixed price follows in writing.
Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.
What you can specify
- Made to measure for each opening
- Clear, tinted, obscure, low-iron and sandblasted finishes
- Single panes or the outer pane of a sealed unit
- Holes, notches and polished edges for frameless fittings
- Four to five times the strength of annealed glass
- Made to BS EN 12150 and marked for identification
Fitting in Newcastle upon Tyne and nearby
We arrange surveys and fitting across Newcastle upon Tyne and the NE1 postcode district, and in nearby Gateshead (1 mile), Felling (2 miles) and Wallsend.
Tyne and Wear covers Newcastle's Grainger Town stone streets and quayside offices, the town centres of Sunderland and Gateshead, and large inter-war and post-war housing estates.
This glazing suits:
- Frameless office partitions and doors
- Glazed doors and side panels
- Shower screens and splashbacks
- Panes below 800 mm in homes and offices
Questions we will ask at the survey
Barriers and balustrades
Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.
Toughened or laminated
Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.
Building regulations and safety in England
Replacing glass in an existing frame
Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.
Safety glass in critical locations
In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.
How it works
- Send sizes or use the quote tool
- Free survey at your Newcastle upon Tyne address
- Fixed price in writing
- Glass made, then fitted
Toughened safety glass in Newcastle upon Tyne: questions
Do you cover Gateshead as well as Newcastle upon Tyne?
Yes. As well as Newcastle upon Tyne, we can arrange surveys in nearby Gateshead, Felling and Wallsend. Dates depend on installer availability.
Why did my toughened glass break on its own?
Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.
How can I tell if glass is toughened?
Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.
Can toughened glass be cut to fit?
No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.
Toughened safety glass in nearby towns
Other glazing in Newcastle upon Tyne
- Glazing bead security upgrades
- Security glass for doors
- Anti-bandit glass
- Kiosk and booth security glazing
- Security window film
- Security secondary glazing
Ready for a price? Use the form or call 0800 088 6248.