Toughened safety glass in Felling

How much does toughened safety glass cost in Felling?

Budget £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Felling, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Heat-soaked option for large and overhead panes
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Breaks into small blunt fragments
Four to five times the strength of annealed glass
Single panes or the outer pane of a sealed unit

Fitting in Felling and nearby

Surveys in Felling (NE10) are booked around installer availability. We also cover nearby Gateshead (1 mile), Newcastle upon Tyne (2 miles) and Hebburn (3 miles).

Tyne and Wear covers Newcastle's Grainger Town stone streets and quayside offices, the town centres of Sunderland and Gateshead, and large inter-war and post-war housing estates.

Typical places for toughened safety glass:

Shower screens and splashbacks
Glazed doors and side panels
Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup

Things to decide before you order

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Rules that apply in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes or use the quote tool
Free survey at your Felling address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Felling: questions

Can you survey in Felling and nearby towns?

Yes. Surveys in Felling, Gateshead and Newcastle upon Tyne are booked around installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Felling

Ready for a price? Use the form or call 0800 088 6248.