Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Toughened safety glass · DE14 · Staffordshire

Toughened safety glass in Burton upon Trent

Toughened safety glass in Burton upon Trent (DE14), with a free survey for new installations and a written quote that names the glass being supplied.

Frameless toughened glass partition and door in a bright office corridor
Free survey

Free quote in Burton upon Trent

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should toughened safety glass cost in Burton upon Trent?

Guide prices for toughened safety glass in Burton upon Trent are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Specification at a glance

  • Single panes or the outer pane of a sealed unit
  • Breaks into small blunt fragments
  • Holes, notches and polished edges for frameless fittings
  • Clear, tinted, obscure, low-iron and sandblasted finishes
  • Heat-soaked option for large and overhead panes
  • Made to BS EN 12150 and marked for identification

Fitting in Burton upon Trent and nearby

Whether you are in central Burton upon Trent or at the edge of the DE14 district, we can arrange a survey. Nearby Swadlincote and Derby are covered too.

Staffordshire mixes Stoke-on-Trent's Victorian pottery-town terraces with Lichfield's cathedral quarter, Burton's brewery streets and newer estates around Tamworth and Cannock.

Good candidates for toughened safety glass:

  • Balustrades in a laminated toughened makeup
  • Panes below 800 mm in homes and offices
  • Shower screens and splashbacks
  • Frameless office partitions and doors

Before the glass is ordered

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Glazing rules in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

  1. Tell us about the glazing
  2. Survey, measuring and frame check
  3. Written quote naming the glass
  4. Fitting and handover

Toughened safety glass in Burton upon Trent: questions

Do you cover Swadlincote as well as Burton upon Trent?

Yes. As well as Burton upon Trent, we can arrange surveys in nearby Swadlincote, Derby and Lichfield. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Burton upon Trent

Get a guide price now and book your free survey in Burton upon Trent.

Get a guide price for Burton upon Trent

Free survey for new installations in Burton upon Trent and the DE14 area. Fixed price in writing before anything is ordered.

CallGet a price