Toughened safety glass in Coalville

Toughened safety glass in Coalville: what will it cost?

Typical prices for toughened safety glass in Coalville are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What goes into toughened safety glass

Heat-soaked option for large and overhead panes
Single panes or the outer pane of a sealed unit
Made to BS EN 12150 and marked for identification
Clear, tinted, obscure, low-iron and sandblasted finishes
Holes, notches and polished edges for frameless fittings
Breaks into small blunt fragments

Fitting in Coalville and nearby

Surveys in Coalville (LE67) are booked around installer availability. We also cover nearby Loughborough (8 miles), Swadlincote (9 miles) and Leicester (12 miles).

Leicestershire combines Leicester's city-centre and suburban shopping streets and Victorian terraces with market towns such as Loughborough, Hinckley and Market Harborough.

Typical settings for toughened safety glass:

Shower screens and splashbacks
Panes below 800 mm in homes and offices
Frameless office partitions and doors
Balustrades in a laminated toughened makeup

Getting the right glass for your building

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

What the rules say in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Guide price online or by phone
Survey in Coalville
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Coalville: questions

Can you survey in Coalville and nearby towns?

Yes. Surveys in Coalville, Loughborough and Swadlincote are booked around installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Toughened safety glass in nearby towns

Other glazing in Coalville

Tell us about the glazing and we will come back with a guide price.