Toughened safety glass in Lichfield

How much should I budget for toughened safety glass in Lichfield?

Guide prices for toughened safety glass in Lichfield are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Clear, tinted, obscure, low-iron and sandblasted finishes
Made to BS EN 12150 and marked for identification
Holes, notches and polished edges for frameless fittings
Four to five times the strength of annealed glass
Breaks into small blunt fragments
Heat-soaked option for large and overhead panes

Fitting in Lichfield and nearby

We can arrange toughened safety glass anywhere in Lichfield, and in nearby Burntwood, Tamworth and Aldridge. Tell us your postcode and we will offer dates.

Staffordshire mixes Stoke-on-Trent's Victorian pottery-town terraces with Lichfield's cathedral quarter, Burton's brewery streets and newer estates around Tamworth and Cannock.

Common uses:

Glazed doors and side panels
Balustrades in a laminated toughened makeup
Frameless office partitions and doors
Panes below 800 mm in homes and offices

What to think about first

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Consents and safety: England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

How it works

Send sizes or use the quote tool
Free survey at your Lichfield address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Lichfield: questions

Which areas near Lichfield do you cover?

We can arrange work in Lichfield and in nearby Burntwood (4 miles), Tamworth (6 miles) and Aldridge (7 miles). Dates depend on installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Lichfield

Ready for a price? Use the form or call 0800 088 6248.