Toughened safety glass in Nelson

Toughened safety glass in Nelson: what will it cost?

Expect £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Nelson. The written quote names the glass makeup, the price and the lead time before you commit.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Single panes or the outer pane of a sealed unit
Four to five times the strength of annealed glass
Holes, notches and polished edges for frameless fittings
Breaks into small blunt fragments
Made to BS EN 12150 and marked for identification
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Nelson and nearby

We can arrange toughened safety glass anywhere in Nelson, and in nearby Colne, Burnley and Accrington. Tell us your postcode and we will offer dates.

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Typical settings for toughened safety glass:

Balustrades in a laminated toughened makeup
Glazed doors and side panels
Panes below 800 mm in homes and offices
Frameless office partitions and doors

Getting the right glass for your building

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

What the rules say in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Send sizes or use the quote tool
Free survey at your Nelson address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Nelson: questions

Which areas near Nelson do you cover?

We can arrange work in Nelson and in nearby Colne (2 miles), Burnley (3 miles) and Accrington (8 miles). Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Nelson

Ready for a price? Use the form or call 0800 088 6248.