Toughened safety glass in Burnley

What should toughened safety glass cost in Burnley?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Burnley, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Choices you can make

Heat-soaked option for large and overhead panes
Made to measure for each opening
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments
Clear, tinted, obscure, low-iron and sandblasted finishes
Made to BS EN 12150 and marked for identification

Fitting in Burnley and nearby

We can arrange toughened safety glass anywhere in Burnley, and in nearby Nelson, Colne and Accrington. Tell us your postcode and we will offer dates.

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Good candidates for toughened safety glass:

Glazed doors and side panels
Shower screens and splashbacks
Frameless office partitions and doors
Balustrades in a laminated toughened makeup

Before the glass is ordered

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Send sizes or use the quote tool
Free survey at your Burnley address
Fixed price in writing
Glass made, then fitted

Toughened safety glass in Burnley: questions

Which areas near Burnley do you cover?

We can arrange work in Burnley and in nearby Nelson (3 miles), Colne (5 miles) and Accrington (6 miles). Dates depend on installer availability.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Toughened safety glass in nearby towns

Other glazing in Burnley

Ready for a price? Use the form or call 0800 088 6248.