Security and safety glass, supplied and fitted · England, Wales, Scotland and Northern Ireland
Security Glazing UKSECURITY GLAZING.UK 0800 088 6248 Get a quote
Blast-resistant glazing · BB9 · Lancashire

Blast-resistant glazing in Nelson

Start with a guide price for blast-resistant glazing in Nelson, then book a free survey for a fixed written quote.

Office building entrance with heavy dark grey aluminium frames and thick glass panels
Free survey

Free quote in Nelson

Tell us about the glass. We reply with a guide price and arrange a free survey.

Enter a UK postcode
Enter your name
Enter a phone number
Check the email address

What should blast-resistant glazing cost in Nelson?

Expect £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for blast-resistant glazing in Nelson. The written quote names the glass makeup, the price and the lead time before you commit.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

  • Anti-shatter film with edge-retention systems for existing windows
  • Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
  • Manufacturer's test evidence supplied with your quote
  • Work planned from the threat assessment and engineer's design
  • Sealed units with a laminated inner pane
  • Deep-bite frames and structural silicone or mechanical retention

Fitting in Nelson and nearby

Surveys in Nelson (BB9) are booked around installer availability. We also cover nearby Colne (2 miles), Burnley (3 miles) and Accrington (8 miles).

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Good candidates for blast-resistant glazing:

  • Government, council and civic buildings
  • Laboratories and industrial sites with process risks
  • Offices in city centres and near potential targets
  • Transport hubs, venues and stadium frontages

Before the glass is ordered

Frame and fixings

The frame must hold the glass and the fixings must hold the frame. Upgrading glass alone can move the failure to the frame.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Glazing rules in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

  1. Send sizes or use the quote tool
  2. Free survey at your Nelson address
  3. Fixed price in writing
  4. Glass made, then fitted

Blast-resistant glazing in Nelson: questions

Can you survey in Nelson and nearby towns?

Yes. Surveys in Nelson, Colne and Burnley are booked around installer availability.

Who decides what level of protection we need?

Your security adviser, insurer or a blast engineer, based on a threat and risk assessment. Government guidance from the National Protective Security Authority covers the approach.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

Can existing windows be made blast-resistant?

They can often be improved. Anti-shatter film with an edge-retention system, laminated replacement glass in strengthened frames or internal secondary glazing can cut the flying-glass hazard, depending on the threat.

Blast-resistant glazing in nearby towns

Other glazing in Nelson

Ready for a price? Use the form or call 0800 088 6248.

Get a guide price for Nelson

Free survey for new installations in Nelson and the BB9 area. Fixed price in writing before anything is ordered.

CallGet a price