Toughened safety glass in Hertford

How much should I budget for toughened safety glass in Hertford?

As a guide, allow £114 to £414 including VAT (£95 to £345 plus VAT) per pane for toughened safety glass in Hertford, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Made to BS EN 12150 and marked for identification
Four to five times the strength of annealed glass
Heat-soaked option for large and overhead panes
Clear, tinted, obscure, low-iron and sandblasted finishes
Single panes or the outer pane of a sealed unit
Breaks into small blunt fragments

Fitting in Hertford and nearby

We arrange surveys and fitting in Hertford and across the SG13 postcode district, as well as in nearby Hoddesdon (4 miles) and Welwyn Garden City (6 miles). Dates depend on installer availability.

Hertfordshire includes the historic centres of St Albans and Hertford, post-war new towns such as Stevenage and Hatfield, and Watford's shops and office parks along the M1.

Common uses:

Panes below 800 mm in homes and offices
Glazed doors and side panels
Balustrades in a laminated toughened makeup
Frameless office partitions and doors

What to think about first

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Consents and safety: England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Guide price online or by phone
Survey in Hertford
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in Hertford: questions

Do you cover Hoddesdon as well as Hertford?

Yes. As well as Hertford, we can arrange surveys in nearby Hoddesdon, Welwyn Garden City and Hatfield. Dates depend on installer availability.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in Hertford

Tell us about the glazing and we will come back with a guide price.