Toughened safety glass in Hatfield

What is the price of toughened safety glass in Hatfield?

Guide prices for toughened safety glass in Hatfield are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Glass and fitting options

Holes, notches and polished edges for frameless fittings
Made to measure for each opening
Heat-soaked option for large and overhead panes
Made to BS EN 12150 and marked for identification
Four to five times the strength of annealed glass
Clear, tinted, obscure, low-iron and sandblasted finishes

Fitting in Hatfield and nearby

From the AL10 district we also cover Welwyn Garden City (3 miles) and St Albans (5 miles). Survey dates depend on installer availability.

Hertfordshire includes the historic centres of St Albans and Hertford, post-war new towns such as Stevenage and Hatfield, and Watford's shops and office parks along the M1.

This glazing suits:

Panes below 800 mm in homes and offices
Frameless office partitions and doors
Shower screens and splashbacks
Balustrades in a laminated toughened makeup

Questions we will ask at the survey

Toughened or laminated

Toughened gives strength and safe breakage. Laminated gives safe breakage and stays in place, which is what security needs. Many doors use both in one sealed unit.

Heat soaking

Rare nickel sulphide inclusions can make toughened glass break without warning. Heat soaking reduces the risk and is worth specifying for large, high or overhead panes.

Building regulations and safety in England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in Hatfield: questions

Can you survey in Hatfield and nearby towns?

Yes. Surveys in Hatfield, Welwyn Garden City and St Albans are booked around installer availability.

Why did my toughened glass break on its own?

Occasionally a tiny nickel sulphide inclusion or edge damage causes spontaneous breakage. Heat-soak tested glass reduces the risk for large or high panes.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Toughened safety glass in nearby towns

Other glazing in Hatfield

Get a guide price now and book your free survey in Hatfield.