Toughened safety glass in St Albans

Toughened safety glass in St Albans: what will it cost?

Guide prices for toughened safety glass in St Albans are £114 to £414 including VAT (£95 to £345 plus VAT) per pane for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

What you can specify

Single panes or the outer pane of a sealed unit
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Four to five times the strength of annealed glass
Breaks into small blunt fragments
Made to measure for each opening

Fitting in St Albans and nearby

We arrange surveys and fitting in St Albans and across the AL1 postcode district, as well as in nearby Harpenden (5 miles) and Hatfield (5 miles). Dates depend on installer availability.

Hertfordshire includes the historic centres of St Albans and Hertford, post-war new towns such as Stevenage and Hatfield, and Watford's shops and office parks along the M1.

Typical settings for toughened safety glass:

Frameless office partitions and doors
Panes below 800 mm in homes and offices
Shower screens and splashbacks
Balustrades in a laminated toughened makeup

Getting the right glass for your building

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

What the rules say in England

England

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Guide price online or by phone
Survey in St Albans
Accept the fixed quote
Fitted by glaziers working under our contract

Toughened safety glass in St Albans: questions

Do you cover Harpenden as well as St Albans?

Yes. As well as St Albans, we can arrange surveys in nearby Harpenden, Hatfield and Hemel Hempstead. Dates depend on installer availability.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

How can I tell if glass is toughened?

Look for a permanent mark etched in a corner naming the standard. Polarised sunglasses can also show faint patterns in toughened glass. We can check during the survey.

Toughened safety glass in nearby towns

Other glazing in St Albans

Tell us about the glazing and we will come back with a guide price.