Toughened safety glass in Hampshire

What is the price of toughened safety glass in Hampshire?

Typical prices for toughened safety glass in Hampshire are £114 to £414 including VAT (£95 to £345 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

Toughened safety glass is ordinary glass that has been heated and rapidly cooled so its surface is held in compression, making it four to five times stronger than annealed glass of the same thickness. If it does break, it shatters into small, relatively blunt pieces instead of sharp shards, which is why it is used in doors, low-level panes and frameless partitions.

Options for toughened safety glass in Hampshire

Clear, tinted, obscure, low-iron and sandblasted finishes
Four to five times the strength of annealed glass
Breaks into small blunt fragments
Holes, notches and polished edges for frameless fittings
Made to BS EN 12150 and marked for identification
Single panes or the outer pane of a sealed unit

Covering Hampshire

We can arrange surveys and fitting anywhere in Hampshire, including Southampton and Portsmouth. Dates depend on installer availability. Choose your town below for local details.

Hampshire covers the port-city shops and offices of Southampton and Portsmouth, Winchester's listed centre, and commuter estates around Basingstoke, Eastleigh and Fareham.

This glazing suits:

Glazed doors and side panels
Frameless office partitions and doors
Panes below 800 mm in homes and offices
Balustrades in a laminated toughened makeup

Towns in Hampshire

Questions we will ask at the survey

Measure once, carefully

Toughened glass cannot be cut afterwards, so holes and sizes are fixed at the factory. Accurate survey measurements avoid remakes.

Barriers and balustrades

Glass that acts as a barrier usually needs a laminated toughened makeup so it stays in place if one ply breaks.

Building regulations and safety in England

England

Replacing glass in an existing frame

Replacing only the glass or sealed unit in an existing frame is generally treated as a repair in England rather than notifiable building work. Replacing a whole window or door is notifiable and is normally certified through a competent person scheme or approved by building control. Either way, new glass in a critical location should still be safety glass.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Toughened safety glass in Hampshire: questions

Which towns in Hampshire do you cover?

We can arrange work anywhere in Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport and Waterlooville, and in other towns across the area.

Can toughened glass be cut to fit?

No. Cutting or drilling toughened glass makes it shatter, so every pane, hole and notch is made to size before toughening.

Where must safety glass be used?

In critical locations: in England, Approved Document K covers glazing in and beside doors up to 1,500 mm from the floor and other glazing below 800 mm; Wales has the same idea in its Approved Document N, Scotland in standard 4.8 and Northern Ireland in Part V. Glass there must be safety glass or protected.

Is toughened glass a security glass?

No. Toughened glass is strong and breaks safely, but once broken the pane falls out and leaves the opening clear. For security, choose laminated glass or a unit with a laminated pane.

Other glazing in Hampshire

Get a guide price now and book your free survey in Hampshire.

Free quote in Hampshire