Laminated glass retrofit in Thornaby-on-Tees

What should laminated glass retrofit cost in Thornaby-on-Tees?

Typical prices for laminated glass retrofit in Thornaby-on-Tees are £174 to £534 including VAT (£145 to £445 plus VAT) per pane, supplied and fitted. Use the quote tool for a guide figure, then we survey and confirm a fixed price.

A laminated glass retrofit replaces the glass in frames you already have with laminated glass or laminated sealed units, so an existing building gets much more resistance to break-in without the cost and disruption of new windows. It suits homes, offices and shops where the frames are still sound.

Glass and fitting options

Hinge, stay and roller adjustment after fitting
Survey of every frame before ordering
Pane-by-pane record of glass fitted
Frames, finishes and locks unchanged
Laminated single panes or laminated sealed units
Security tape and bead clips where needed

Fitting in Thornaby-on-Tees and nearby

From the TS17 district we also cover Stockton-on-Tees (3 miles) and Billingham (4 miles). Survey dates depend on installer availability.

North Yorkshire includes York's walled city and listed streets, Harrogate's Victorian stone terraces, Middlesbrough's town centre and coastal Scarborough and Whitby.

Good candidates for laminated glass retrofit:

Offices with older glazing
Buildings where frames are too new to replace
Blocks of flats with communal glazing
Shops wanting more security without a new frontage

Before the glass is ordered

Frame condition

If a frame is too shallow, damaged or weak, we will say so rather than fit heavier glass into it.

Class of glass

P2A suits most homes and offices. Shops and cash areas may need P4A or anti-bandit classes.

Glazing rules in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover