Security glass units in Thornaby-on-Tees

What should security double-glazed units cost in Thornaby-on-Tees?

Budget £174 to £594 including VAT (£145 to £495 plus VAT) per unit for security double-glazed units in Thornaby-on-Tees, supplied and fitted. Larger panes, thicker makeups and difficult access cost more; the price is fixed in writing after the survey.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Choices you can make

Made to measure for each sash, light and door panel
Obscure and decorative glass for bathrooms and doors
Warm-edge spacer bars in black, grey or white
Low-E coating and argon fill for insulation
Security glazing tape or clips where beads are external
24 mm, 28 mm and other overall thicknesses to suit frames

Fitting in Thornaby-on-Tees and nearby

We can arrange security double-glazed units anywhere in Thornaby-on-Tees, and in nearby Stockton-on-Tees, Billingham and Middlesbrough. Tell us your postcode and we will offer dates.

North Yorkshire includes York's walled city and listed streets, Harrogate's Victorian stone terraces, Middlesbrough's town centre and coastal Scarborough and Whitby.

Good candidates for security double-glazed units:

Replacing misted or damaged units
Glazed back and side doors
Ground-floor and basement windows
Patio doors and bifolds

Before the glass is ordered

Overall thickness

The new unit must suit the frame's glazing rebate. If your frames only take thin units, we use thinner laminates or adjust the beads.

Energy performance

Choosing low-E glass, argon and warm-edge spacers keeps the window as efficient as possible, often better than the unit being replaced.

Glazing rules in England

England

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

How it works

Guide price online or by phone
Survey in Thornaby-on-Tees
Accept the fixed quote
Fitted by glaziers working under our contract

Security double-glazed units in Thornaby-on-Tees: questions

Which areas near Thornaby-on-Tees do you cover?

We can arrange work in Thornaby-on-Tees and in nearby Stockton-on-Tees (3 miles), Billingham (4 miles) and Middlesbrough (4 miles). Dates depend on installer availability.

Will a laminated unit be heavier?

A little. A laminated pane weighs about the same as a solid sheet of the same thickness. On large opening sashes we check hinges and friction stays.

Which pane should be laminated?

Usually the inner pane, so smashing the outer pane does not create an opening. On doors and low panes the outer pane is normally toughened to meet safety rules.

Can I just replace the glass and keep my frames?

Yes, if the frames are sound. We measure each unit, make security units to the same size and fit them into your existing frames.

Security double-glazed units in nearby towns

Other glazing in Thornaby-on-Tees

Tell us about the glazing and we will come back with a guide price.

Security double-glazed units in Thornaby-on-Tees

Free quote in Thornaby-on-Tees