Security glass for doors in Margate

What is the price of security glass for doors in Margate?

As a guide, allow £150 to £510 including VAT (£125 to £425 plus VAT) per door for security glass for doors in Margate, supplied and fitted. Size, glass makeup, access and frame condition move the price, which is confirmed in writing after the free survey.

Security glass for doors replaces the glazed panel in a front, back or side door with laminated safety glass, usually in a sealed unit with a toughened outer pane. It stops the common trick of breaking the glass to reach in and turn a key or thumb-turn left in the lock.

What goes into security glass for doors

Clear, obscure and decorative designs
Works with timber, uPVC, composite and aluminium doors
Composite door cassettes where available
Glass for side panels and fanlights beside the door
Laminated backing for leaded and bevelled panels
Internal beads or security tape so glass is much harder to remove from outside

Fitting in Margate and nearby

Surveys in Margate (CT9) are booked around installer availability. We also cover nearby Broadstairs (3 miles), Ramsgate (3 miles) and Deal (11 miles).

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

This glazing suits:

Kitchen and utility doors onto the garden
Back and side doors with a large glazed panel
Doors with a thumb-turn lock near the glass
Flat entrance doors with vision panels

Questions we will ask at the survey

Keep the design

Most decorative glass can be copied or rebuilt with a laminated backing pane, so the door looks the same.

Composite door glass

Some composite doors use a cassette made by the door's maker. We check whether a laminated version is available before quoting.

Building regulations and safety in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

How it works

Send sizes or use the quote tool
Free survey at your Margate address
Fixed price in writing
Glass made, then fitted

Security glass for doors in Margate: questions

Can you survey in Margate and nearby towns?

Yes. Surveys in Margate, Broadstairs and Ramsgate are booked around installer availability.

Can you keep my stained or leaded glass design?

Usually. We add a laminated pane behind the decorative glass inside the sealed unit, or have a matching unit made.

Does door glass have to be safety glass?

Yes. Glass in doors up to 1,500 mm from the floor, and in side panels within 300 mm of the door edge, counts as a critical location and needs safety glass or protection.

Is toughened glass enough for a door?

It meets the safety rule but not the security need, because a broken toughened pane falls out. A laminated pane meets both.

Security glass for doors in nearby towns

Other glazing in Margate

Ready for a price? Use the form or call 0800 088 6248.