Security double-glazed units in Margate

What is the price of security double-glazed units in Margate?

Guide prices for security double-glazed units in Margate are £174 to £594 including VAT (£145 to £495 plus VAT) per unit for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

A security double-glazed unit is a sealed unit in which one or both panes are laminated glass, usually the inner pane, so the window keeps its insulation but resists being broken through. It fits the same frame as a standard unit and is the simplest way to add security to modern windows and doors.

Specification at a glance

Security glazing tape or clips where beads are external
Made to measure for each sash, light and door panel
Obscure and decorative glass for bathrooms and doors
24 mm, 28 mm and other overall thicknesses to suit frames
Laminated inner pane, outer pane or both
Warm-edge spacer bars in black, grey or white

Fitting in Margate and nearby

Whether you are in central Margate or at the edge of the CT9 district, we can arrange a survey. Nearby Broadstairs and Ramsgate are covered too.

Kent ranges from Canterbury's listed city centre and the Regency fronts of Tunbridge Wells to the Medway towns, Ashford's growth estates and coastal Margate and Folkestone.

This glazing suits:

Replacing misted or damaged units
Glazed back and side doors
Ground-floor and basement windows
Patio doors and bifolds

Questions we will ask at the survey

Internal or external beads

If your beads are on the outside, we add security tape or clips so the unit cannot be lifted out after the beads are removed.

Energy performance

Choosing low-E glass, argon and warm-edge spacers keeps the window as efficient as possible, often better than the unit being replaced.

Building regulations and safety in England

England

Safety glass in critical locations

In England, section 5 of Approved Document K treats glazing in doors and in side panels within 300 mm of a door edge, from floor level up to 1,500 mm, and any other glazing below 800 mm, as a critical location. Glass there should break safely, be robust, or be guarded. Laminated or toughened glass meeting BS EN 12600 class 3 is the usual answer, rising to class 2 for door and side-panel panes wider than 900 mm.

Security rules for new homes

Approved Document Q has applied to new homes in England since 1 October 2015. Easily accessible doors and windows, meaning any part within 2 m vertically of the ground or another accessible surface, should meet PAS 24 or an equivalent, and glazing in doors and in windows within 400 mm of a door should be laminated to at least BS EN 356 P1A. It does not apply when you change the glass in an existing home, although it is a sensible benchmark.

How it works

Postcode and a few photos
On-site survey
Fixed written price and lead time
Fit, check and explain

Security double-glazed units in Margate: questions

Do you cover Broadstairs as well as Margate?

Yes. As well as Margate, we can arrange surveys in nearby Broadstairs, Ramsgate and Deal. Dates depend on installer availability.

Can I just replace the glass and keep my frames?

Yes, if the frames are sound. We measure each unit, make security units to the same size and fit them into your existing frames.

How long do new units take?

Units are made to order after the survey. Lead times vary with glass type and size, and we confirm them when we quote.

Do security units reduce noise?

Laminated glass already damps sound better than plain glass, and acoustic interlayers improve it further, which helps on busy roads.

Security double-glazed units in nearby towns

Other glazing in Margate

Start with a guide price online, then we survey and fix the price in writing.