Blast-resistant glazing in Skelmersdale

How much should I budget for blast-resistant glazing in Skelmersdale?

Guide prices for blast-resistant glazing in Skelmersdale are £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m² for supply and fitting. We confirm a fixed price in writing after a free survey, before any glass is ordered.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

What goes into blast-resistant glazing

Deep-bite frames and structural silicone or mechanical retention
Sealed units with a laminated inner pane
Work planned from the threat assessment and engineer's design
Manufacturer's test evidence supplied with your quote
Laminated glass with thick or stiff interlayers
Anti-shatter film with edge-retention systems for existing windows

Fitting in Skelmersdale and nearby

Surveys in Skelmersdale (WN8) are booked around installer availability. We also cover nearby Ormskirk (5 miles), Wigan (6 miles) and Kirkby (7 miles).

Lancashire pairs Victorian terraces and town-centre retail in Preston and Blackburn with Lancaster's Georgian stone streets and the seafront hotels, shops and arcades of Blackpool.

Common uses:

Laboratories and industrial sites with process risks
Offices in city centres and near potential targets
Government, council and civic buildings
Embassies, courts and police premises

What to think about first

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

New glazing or retrofit

New facades can be designed as a full tested system. Existing buildings often get film with edge retention, internal secondary glazing or curtains instead.

Consents and safety: England

England

Fire-rated glass is different

Glass in fire doors, fire screens and protected escape routes has to be fire-rated glass tested as part of that door or screen system, under Approved Document B and the fire safety duties of the building's responsible person. Laminated and security glass are not fire-rated unless the product says so. Where a pane needs both fire and security performance, it must be a product tested for both.

Listed buildings and conservation areas

In England, listed building consent from the council may be needed to replace historic glass such as crown or cylinder glass, or to alter glazing bars, sashes and frames. Historic England publishes guidance on traditional windows. Secondary glazing and window film are often easier to agree because they can be removed later, but the council's conservation officer makes the decision.

How it works

Guide price online or by phone
Survey in Skelmersdale
Accept the fixed quote
Fitted by glaziers working under our contract

Blast-resistant glazing in Skelmersdale: questions

Can you survey in Skelmersdale and nearby towns?

Yes. Surveys in Skelmersdale, Ormskirk and Wigan are booked around installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Skelmersdale

Tell us about the glazing and we will come back with a guide price.