Blast-resistant glazing in Fulham

What is the price of blast-resistant glazing in Fulham?

Our guide range for blast-resistant glazing in Fulham is £450 to £1,495 plus VAT (£540 to £1,794 inc VAT) per m², including fitting. The survey is free for new installations and your fixed price follows in writing.

Blast-resistant glazing is laminated glass fitted in a frame and fixing system designed to stay in the opening, or fail safely, when hit by the pressure wave from an explosion. Its purpose is to stop glass becoming high-speed fragments, which cause most injuries in a blast, and it is designed from a threat assessment rather than chosen off the shelf.

Specification at a glance

Laminated glass with thick or stiff interlayers
Anti-shatter film with edge-retention systems for existing windows
Manufacturer's test evidence supplied with your quote
Deep-bite frames and structural silicone or mechanical retention
Glazing classed to BS EN 13541 or tested to ISO 16933 and 16934
Sealed units with a laminated inner pane

Fitting in Fulham and nearby

Whether you are in central Fulham or at the edge of the SW6 district, we can arrange a survey. Nearby Chelsea and Putney are covered too.

Greater London has every kind of glazing, from Georgian sashes and Victorian bays in conservation areas to high-street shopfronts, office curtain walling and new-build flats.

This glazing suits:

Government, council and civic buildings
Transport hubs, venues and stadium frontages
Offices in city centres and near potential targets
Laboratories and industrial sites with process risks

Questions we will ask at the survey

Fragment hazard

Some designs accept that glass will break but keep it in place; others allow controlled failure into a catching system. Both aim to stop flying shards.

Who sets the level

The design pressure comes from a threat and risk assessment by a security adviser or blast engineer, not from the glass supplier.

Building regulations and safety in England

England

Planning permission

Changing the glass in an existing window or shopfront does not usually need planning permission, because the building looks much the same afterwards. A new or altered shopfront, or security features added to the outside of a building, may need planning permission from the council. Bollards or barriers on the pavement need the highway authority's consent, which is normally the council.

Glazing in workplaces

Regulation 14 of the Workplace (Health, Safety and Welfare) Regulations 1992 requires windows and transparent surfaces in walls, partitions, doors and gates to be of safety material or protected against breakage where health or safety makes that necessary, and to be marked so people notice them. The employer or the person in control of the premises decides what is needed through their risk assessment.

How it works

Tell us about the glazing
Survey, measuring and frame check
Written quote naming the glass
Fitting and handover

Blast-resistant glazing in Fulham: questions

Do you cover Chelsea as well as Fulham?

Yes. As well as Fulham, we can arrange surveys in nearby Chelsea, Putney and Battersea. Dates depend on installer availability.

Does blast glazing affect fire doors and fire screens?

Glass in fire-rated doors and screens must stay fire-rated glass tested in that system. Blast measures there need fire-rated products or a specialist design, never a swap to plain laminated glass.

Is blast film enough on its own?

Film helps hold glass together but works much better when the film is anchored to the frame so the whole pane cannot fly in. Plain film without retention offers less.

What does ER1 to ER4 mean?

They are explosion-pressure classes in BS EN 13541. Glass samples are tested in a shock tube, with higher classes meaning higher pressures. The class applies to the glass, so the frame must be designed to match.

Blast-resistant glazing in nearby towns

Other glazing in Fulham

Get a guide price now and book your free survey in Fulham.

Free quote in Fulham